Review 2D Item ( Drawing Editor )

Tool summary :

• Opens a read-only window that shows you the settings applied in Modeling to the auto detailed bolt, material or hole that you select in your current drawing.
• Your current drawing must have been auto detailed. Drawing types that are auto detailed are member details (including a group member detail), submaterial details and 2D erection views .
• You cannot change material settings using Review 2D Item , but you can review those settings in order to, for instance, determine whether you need to return to Modeling in order to make changes to the item.
• Review 2D Item can open, in the Drawing Editor , read-only versions of the following edit windows from Modeling :
  
  

  3D Bolt Edit	3D Hole Edit	Rolled Section
  Rectangular Plate	Round Plate	Rolled Plate
  Bent Plate	Multi-sided Plate	Multi-bend Plate
  Round Bar	Square Bar	Flat Bar
  Grating	Grating Tread	Decking
  Shear Stud	Turned Solid/Shell	Standard Part
  Clevis	Turnbuckle	General Information

• An alternative to Review 2D Item :
  
  
  • To review the settings from Modeling on an auto-detailed material, set the selection filter to ' Polygons ' or ' All ', then double-click the material. For an auto-detailed hole or bolt, set the filter to ' Polygons '.
• See (on this page):
  
  
  • Needs-to-be-detailed warning
  • Step-by-step instructions

Also see :

• Drawing Editor (where Review 2D Item is a tool)
• Double-click (alternative in Select Items mode)
• Material Callout (provides info on same items as does Review 2D Item )

page 1 | contents | tools > | tools

---

   Needs-to-be-detailed warning :

Since Review 2D Item gets its information from the 3D model in Modeling , the member detail (including group member details) or submaterial detail , or erection view drawing that is your current drawing must be up to date. If it is not, you may get a warning message similar to the following:

This drawing needs to be detailed before this item can be reviewed.

For erection views and bolts only: If your current drawing is an erection view that is out of date and you Review 2D Items (or double-click ) a bolt, the information provided about the bolt may not match the actual bolt that in the model. For member details, a needs-to-be-detailed message like that shown above will prevent this from happening. Also, since there are no bolts on submaterial details, this does not happen for submaterial details.

page 1 | contents | tools > | tools | top

---

   Step-by-step instructions :

The following instructions assume that you are using a 3-button mouse. You must do either step 1b (preselection) or step 3 (in-tool selection) to perform this operation.

1 . Before using this tool:

1a (optional) : If you want to select material polygons in step 1b, the selection filter must be set to ' Polygons '. This, however, is not required if you do step 3.

Select Items bindings (step 1b)

1b (optional) : In Select Items mode with an appropriate selection filter selected, left-click ( Select ) the material ( polygon ) or auto-detailed bolt or auto-detailed hole that you want to review.

2 . Invoke Review 2D Item using any one (1) of the following methods:

Method 1 : Click the Review 2D Item icon. The icon can be taken from the group named ' Tools ' and placed on a toolbar (classic) or the ribbon (lightning).

Method 2 : If " Drawing Editor layout style " is ' Classic ', you can use the menu system to choose Tools > Review 2D Item .

Method 3, 4 or 5 : Review 2D Item can also be invoked using a keyboard shortcut , the context menu , or a mode . For the ' Lightning ' layout style, configuration of the interface is done using Customize Interface .

3 . Skip this step if you did step 1b.

Select One Item bindings

3a (if you didn't do 1b) : Review 2D Item prompts you to use Select One Item options to click the one material or bolt or hole that you want. The status line prompts, " Select a system-generated material, bolt or hole ."

4 . If you current drawing is a member detail that needs to be redetailed, then a needs-to-be-detailed warning notifies you of such, and Review 2D Item is not able to open the review window. Otherwise, Review 2D Item opens a read-only version of the edit window for the material or bolt or hole that you selected.

4a (optional for a material) : Press the " General Information " button to open the General Information window, which you can use to review additional information about the material. On that window, you can press the " Properties " button to open the Edit Properties window for the material.

4b : Review the settings that you are interested in, then press the " OK " button at the bottom of the window to close the window.

5 . This operation is now done.

page 1 | contents | tools > | tools | top